Eine leidige Diskussion

[BaudirEine]

hallo an alle Zweifler

Damit aus meiner Sicht, die Diskussion endlich mal ein Ende nimmt -
wegen angeschraubter Stege, habe ich mir heute Nacht die Mühe gemacht, alle Zitate
aus dem Buch „ Gibson's Fabulous Flattops“ raus zu suchen, in denen Steg und Verschraubungen vorkommen.

Es folgen nun diese Zitate mit Seitenangaben , Modell und Baujahr ( wenn angegeben )
Alles in Englisch!

Seite 40 JUMBO 1934/35

>> The small maple bridge plate is glued under a bridge kept in place without bolts – only later
would Gibson mix metal witl wood and glue im attempt to make the small bridges stay put <<


Seite 42 J-35 ab 1937

>> For example , bridge screws were added....<<


Seite 49 Advanced Jumbo ab 1939

>> Against such a large body, the Brazilian Rosewood bridge seems very small, in fact
measuring .910“ wide and .61“ long, and requiring two tiny bolts to help hold it down ..<<


Seite 52 J-55


>> „open moustache bridge....., with the bridge pins arranged in a semicircular pattern

behind a bone saddle and the two pearl dote covering the bridge bolts <<

Seite 52/53 Keine Modellangabe ab 1930


>> By 1941 the coffewood „moustache „ bridge was also dropped, in favor of the threepointed,
batwing design of Brazilian rosewood, whose three pearl dots covered bridge bolts <<


Seite 85 SJ-100 1939


>> The moustache bridge differed from that of the SJ-200 only in having less trim
( two pearl dots covering the bridge bolts) as opposed to an additional four ribbons of pearl...<<




Seite 97 LG-2 1942


>>Machine screws passed through the bridge top and the pad, helping to hold the things together,
Pearl dots on the bridge hid these screws..<<


Seite 104 F-25 und B-25 1963

>> Typical bridge bolts anchored the bridge to the top and pad <<


Seite 133 B-25 – 12 1961


>> The large adjustable bridge was a top-belly pin design of rosewood with two pearl dots
covering the heads of the bridge bolts <<




Seite 148 SJ-200 Montana Reissue 1991

>> Gibson took great care in reproducing the ebony „ moustache“ bridges –
two pairs of pearl ribbons were retained, as were the two pearl dots covering
the bridge bolts <<



Seite 194

>> Most gibson bridges during these early great years ( 30's through the 50's ) were bolted on,
with the bolt heads covered by decorative pearl dots <<



Vielleicht hilfts ja , um den ein oder anderen zu überzeugen

Andy

[Admin]

Wovon zu überzeugen ? Daß tiny bolts verwendet wurden ?

[Gast]

Das Gibson Brücken draufschraubt?